BEER CADDY (12 BOTTLES)

Beer Caddy 3D Model

3D Model Description:

ABOUT

I really dig Zenziwerkens Design and made my own variant with some modifications: - 12 bottles (me and my friends tend to be thirsty :) ) - 5.8mm popplar plywood

CUTTING

I used 5.8mm plywood and a 2.00mm single-flute cutter. Speed on my machine is about 600mm/min and 2.5mm attack.

THOUGHTS

5.8mm plywood might be too unstable. I will think about a 12mm OSB or 8mm plywood version.

MORE MATERIAL

You might need 2mm nails as shown in the photos.

FILES

I uploaded DXFs, because TV won't accept my Inkscape SVGs. Hope they are exported allright...