Les Onglous Lighthouse - N(1/160) Scale Model Landmark

The Phare des Onglous is located at the end of a small breakwater that marks the end of the Canal du Midi in Southern France. The Canal du Midi is a 240km long hydraulic work that creates a navigable waterway between the Mediterranean Sea and the Atlantic Ocean. Built in the 17th century, it is one of the most remarkable engineering works of its time. Today it is inscribed as UNESCO World Heritage Site The lighthouse is a small white and red cylindrical tower with a height of 11m (36ft). It flashes a light with white / red sectors. The model was designed using pictures and detailed drawing of the actual building in scale 1/160 (N scale). You can resize it using your favourite software before print, however, if you do so, some of the parts may lose stability or look over scaled. Model has 7 different pieces that you need to assembly as any other model kit: I attached an instruction booklet together with the downloaded files. Printing, painting and weathering will give a lot of fun. This model can be a great addition to your layout or diorama. Happy modelling!

• Designed to be printed using SLA
• L23.4 X W23.4 X H87 mm
• The widest part measure 23.4x23.4 mm: Check your 3dprinter build volume
• The kit has 7 parts: With the download you get both with and without supports.
• The supported files are not with the optimal printing orientation but with the optimal orientation according to minimize sanding and provide a perfect fit between parts. However, you can add supports according to your methods.
• The kit part T1 LAMP correspond to the lamp and has to be printed in clear resin.
• The kit has been designed to allow space for wiring in case you want to lighten with micro LEDs

My 3d model parameters: -ANYCUBIC PHOTON MONO X -Resin ELEGOO standard grey -Layer height 0.040 -Exposure 1.7 s -Bottom layer count 6 /25s or -ANYCUBIC PHOTON M5s -Anycubic High Speed Resin -Default parameters for High Speed resin Happy modelling!